MIRA 7 - checking compressor

Modified on Thu, 30 Dec, 2021 at 4:25 PM

To check that your air compressor is working you can remove the rear panel on your machine and inspect it directly while the machine is on. The location of the compressor is in the image below.


Alternatively,  pull the black 6mm air line from the compressor but pushing in the blue collar on the brass fitting. You can gently place masking tape over the tip of the brass connector and run a program with slow speed and 0% power and see if the masking tape gets blown off by the compressor.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article