Z axis coupler replacement

Modified on Fri, 1 Oct, 2021 at 4:37 PM

what you will have to do to replace your Z axis couplet is as follows.

1. remove the blue cover at the top of your Z axis head with the 6 chrome Allen bolts.

2. Once your motor is exposed remove the four bolts holding your motor down.


3. Loosen the two lower coupler bolts and pull the motor up. Once you have raised the motor you can loosen and remove the top two Allen bolts and remove the coupler.
to install the new ones please follow these steps in reverse. Please note the coupler will only fit onto your machine in one direction.If you have any other questions please let us know.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article