The chiller and compressor plug into the rear of the machine just below the main power wire, either plug will work for either accessory.
You should have received some 8mm pneumatic hose to connect the compressor fitting to the matching fitting on the rear inside left of the machine.
You should also have received some flexible rubber water hose for the chiller. The outlet of the chiller goes to the inlet of the machine and vice versa. Please let us know if you are missing any hoses. In the plastic container for your machine you will have also received a wire that connects to the alarm fitting on the chiller and then there will be a matching fitting on the rear inside left of the machine as well.
To hook up the blower attach 2 of the white ventilation hoses to the T connector included (its a larger sheet metal cube) then from the T connector to the blower with the other white hose. The other ventilation hose is to attach from the blower to your external ventilation location, usually just outside.
Rgds,
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article