To remove the Nova lens undue the knurled bolt circled in red:
Pull out the nozzle assembly:
Remove the nozzle (circled in green) from the nozzle assembly:
Inside the long nozzle assembly, there are 2 notches in a threaded washer that hold in the Nova lens. Use either a small flat blade screw driver or your finger nail to back out the threaded washer.
Note the orientation of the lens when you pull it out (clean lens if necessary).
Put the lens back in the same orientation as how it came out. Thread back in the threaded washer and snug it to the lens (do not over tighten). Insure you do not get finger prints on the lens when putting it back in.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article