For the D-11 and D-23LT machines, we are now recommending that you use the lubricant pictured here for the rails and ballscrews of your machine. (white lithium grease)
To access lubrication areas, take off all bolts highlighted in light blue:
Take off handwheel as well by loosening the set screw and pulling the hand wheel off (highlighted in light blue):
With the white lithium grease, lubricate the parts highlighted in red.
Z axis, 2 rails, 1 ball screw:
Under the table, 1 ball screw, 2 rails (one on each side):
X axis, 1 ball screw, 2 rails:
Replace all covers.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article